3/4" Black screw post extensions are great for adding a little more room to a scrapbook or photo album. This extension is 3/16" in diameter and has a #8/32 thread. They screw into the bottom of a screw post that must have a thread size of #8/32. Your hole must be drilled or punched for 1/4" standard size to allow the post to fit into your project properly. These extensions are anodized with a black coating to give them a great shine. For orders over 25 packs or 2500 pieces ... [More]
Jack chain is ideal for hanging signs at varied heights. Meant to be cut to the desired length and attached with our 1” s-hooks, jack chain is well suited for both long term and short term installations of large and heavy signs.
These posts are manufactured the same as our Aluminum screw posts, then a hard anodize coating is added to produce a black color. These posts are ideal for uses where an enhanced appearance is desirable, yet the strength of aluminum posts is required.
The post length is 5" and the diameter is 3/16". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. ... [More]
These 1/8" clear large-head plastic screw posts are clear resin versions of our black and white large-head plastic screw posts. The large head are ideal for for flexible or lighter materials, or for uses where you want the look of a larger head.
The post length is 1/8" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. Clear plastic screw posts ... [More]
3/8" Antique Brass aluminum screw posts are a quick and easy way to bind any project. The post is 3/8" in length and has a 3/16" diameter. The post and the screw heads both have a 7/16" diameter and are 1/16" thick with a thread size of #8/32. They are wonderful for projects like scrapbooking, book binding, menus, swatches, scripts and so much more. The 3/8" antique brass post comes with a 3/8" screw. You should drill or punch a standard 1/4" hole in ... [More]
These 3/8" loop head screws work the same as our standard push-lock screw posts, with the addition of an open loop on the screw head. The open loop allows for the attachment of beaded chain, wire, cord, monofilament line, plastic ties, metal hooks, etc. This allows the screw post to be used as a hanging point.
Sold in packages of 100.
Specifications:
The head diameter is 17/32”, the same as our large head screw posts.
1/4" Gold Screw Post Extension are perfect for adding more pages to your scrapbook or school projects. These extensions are 3/16" in diameter and 1/4" long. If you are using these extensions without using our screwposts make sure that the product you currently have will work with a 3/16" diameter.
Specifications:
Posts and extensions are 3/16" diameter. They are designed to fit in an industry standard ... [More]
3/4" Antique Brass Extensions work great with our aluminum screw posts. They have a 3/16" diameter and will fit into a standard 1/4" hole punched or drilled. They are great for expanding a project that needs just a little bit more length. These extensions have a anodized coating in Antique Brass that gives them their wonderful color that will not scratch off. Try them today with your scrapbook, photo album, paint swatch and many more projects.
1/4" large-head push-lock screws are available in black and white. They are ideal for rapid assembly of swatch books, brochures, or nearly any material that needs to be bound together. No need to screw the posts together, just press them together with your fingers.
These ultra-short screw posts can be used to bind materials thinner than a standard screw post will handle. They consist of a clear plastic push-lock screw and a clear plastic button cap that the screw snaps into. The 3/16” long screw and button head set will bind materials from 0.020” to 0.060” thick.
Sold in packages of 100.
Specifications:
Minimum binding thickness is 0.020” (about 5 sheets of ... [More]
These 1" clear large-head plastic screw posts are clear resin versions of our black and white large-head plastic screw posts. The large head are ideal for for flexible or lighter materials, or for uses where you want the look of a larger head.
The post length is 1" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. Clear plastic screw posts ... [More]
1/4" Aluminum Screw Post Extensions are anodized in a Antique Brass color to make your project a little old fashioned. They are used for extending the length of our aluminum screw posts. The post length is 1/4". Post length is the length that the extension will add to the screw post it is assembled with. The diameter of the post is 3/16" with a thread size of #8-32. This will work with any post as long as the diameter and thread size match. They come in packs of 20. If ... [More]
3/4" aluminum screw posts are anodized with an Antique Brass finish. This product is as strong and durable as a regular aluminum screw post but has a great antique look. This screw post is ideal for scrapbooking, book binding, menus, swatches and many more projects. The post length is 3/4" and has a 3/16" diameter. It comes with a 3/8" screw and has a thread size of #8/32. To make these posts fit properly you should drill or punch a standard 1/4" hole into your ... [More]
Plastic screw posts are molded Delrin and Polyethelene posts having a large head at one end and a hole at the other. A large-headed screw snaps into the hole on the post, allowing for rapid assembly. Plastic screw posts may be easily unscrewed to remove or add pages.
The post length is 3/16" and the diameter is 0.24". The post length is the maximum binding thickness (inside length). We ... [More]
Loose-leaf rings are round nickel-plated snap hinged rings. These round rings have a locking mechanism that opens to add or subtract materials, yet locks securely once it is closed. The 1/2" are a little difficult to open due to there size so please keep that in mind when ordering. The inside diameter of this loose leaf ring is 1/2”. * Inside diameter is measured from the hinge, because of the small diameter 1/2" size may vary a 1/16th of an inch. When sizing the materials ... [More]
These 3/4" loop head screws work the same as our standard push-lock screw posts, with the addition of an open loop on the screw head. The open loop allows for the attachment of beaded chain, wire, cord, monofilament line, plastic ties, metal hooks, etc. This allows the screw post to be used as a hanging point.
Sold in packages of 100.
Specifications:
The head diameter is 17/32”, the same as our large head screw posts.
Our aluminum screw post extensions can be used to extend the length of any of our aluminum screw posts. These extensions will extend the existing binding length by 1/2". You can use the screws that came with the posts that you are extending. We carry the 3/ 8" screws if you should happen to ... [More]
OUT OF STOCK Screw lock rings, often referred to as King Size Rings or Large Swatch rings are available in sizes 3" through 10". They are typically used to bind carpet swatches, rug samples, upholstery material samples, floor covering swatches, and a myriad of other types of sample or swatch offerings. They can be used to create point of purchase displays and many other display items that benefit from the function of being able to rotate items or pages around a ... [More]
5/8" Aluminum screw posts have many uses. You can use them for binding your prospectus or monthly report. You can also use them for binding color swatches or sample sets. Our 5/8" aluminum screw posts will securely fasten paper, card stock, plastics, thin metal, and a variety of other materials. They can be used to assemble just about any material that you can drill or punch a 1/4" diameter hole through. Just push the post through the hole, ... [More]
Round Head Heavy Duty Steel screw posts are zinc coated steel posts having a large head at one end and a threaded hole at the other. A large-headed screw threads into the threaded hole on the post, allowing the assembly to be opened and closed. These posts are much stronger than our aluminum or plastic posts. They are recommended for binding exceptionally large or heavy materials.
Our aluminum screw post extensions can be used to extend the length of any of our aluminum screw posts. These extensions will extend the existing binding length by 3/4". The screws that came with the posts that you are extending will also fit these extensions. We do carry the ... [More]
These 1-1/2 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more.The posts can be used with our ... [More]
Our 1/8" clear plastic screw posts are clear resin posts having a head at one end and a hole at the other. A matching screw snaps into the hole on the post, allowing for rapid assembly.
The post length is 1/8" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. Clear plastic screw posts will fit nicely in an industry standard 1/4" or ... [More]
2" aluminum screw posts are great for binding large books. These sturdy aluminum posts are available in a wide variety of sizes and can be extended almost indefinitely.
If you want extra security for your large books, a drop of LOK-TITE will keep the screws from loosening under heavy use. If you need a permanent binding, a drop of super glue will make the assembly permanent. Be very certain that you want to do this ... [More]
Heavy-duty punch for punching plastic cards up to 32 mil (0.032") easily. It comes with cushioned handles and a large reservoir to catch the clippings.
Specifications:
The punch is 6-3/4 inches long.
Reach (depth) is 1-1/2 inch.
Punches a 1/4" round hole.
Weight is 14 ounces (0.875 pounds.)
Hardened steel dies punch a clean hole in a wide variety of materials.
Round Head Heavy Duty Steel screw posts are zinc coated steel posts having a large head at one end and a threaded hole at the other. A large-headed screw threads into the threaded hole on the post, allowing the assembly to be opened and closed. These posts are much stronger than our aluminum or plastic posts. They are recommended for binding exceptionally large or heavy materials.
5/8" Aluminum screw posts have many uses. You can use them for binding your prospectus or monthly report. You can also use them for binding color swatches or sample sets. Our 5/8" aluminum screw posts will securely fasten paper, card stock, plastics, thin metal, and a variety of other materials. They can be used to assemble just about any material that you can drill or punch a 1/4" diameter hole through. Just push the post through the hole, thread the screw into the post and ... [More]
