6" aluminum screw posts are CURRENTLY OUT OF STOCK. They are designed for binding very large books. For books and other projects that require a longer post, they can also be extended to almost any length with our screw post extensions. For binding documents this thick, it's a good idea to obtain posts that are slightly longer than the thickness of the book. This will leave room to open the inner pages a bit better, and ... [More]
These posts are manufactured the same as our Aluminum screw posts, then a hard anodize coating is added to produce a black color. These posts are ideal for uses where an enhanced appearance is desirable, yet the strength of aluminum posts is required. The posts are open on the bottom and threaded all the way through, as in the picture to the ... [More]
The 6" wall mount literature holder is a 6” wide x 6-1/2” high literature box designed to mount to a vertical surface. It's sized to hold a stack of bi-fold brochures or similar sized literature. Made from extremely clear polystyrene, this literature holder is carefully finished to show off your literature.
Our 1/8" clear plastic screw posts are clear resin posts having a head at one end and a hole at the other. A matching screw snaps into the hole on the post, allowing for rapid assembly.
The post length is 1/8" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. Clear plastic screw posts will fit nicely in an industry standard 1/4" or ... [More]
3/4" aluminum screw posts are anodized with an Antique Brass finish. This product is as strong and durable as a regular aluminum screw post but has a great antique look. This screw post is ideal for scrapbooking, book binding, menus, swatches and many more projects. The post length is 3/4" and has a 3/16" diameter. It comes with a 3/8" screw and has a thread size of #8/32. To make these posts fit properly you should drill or punch a standard 1/4" hole into your ... [More]
Loose-leaf rings are round nickel-plated snap hinged rings. These round rings have a locking mechanism that opens to add or subtract materials, yet locks securely once it is closed. The 1/2" are a little difficult to open due to there size so please keep that in mind when ordering. The inside diameter of this loose leaf ring is 1/2”. * Inside diameter is measured from the hinge, because of the small diameter 1/2" size may vary a 1/16th of an inch. When sizing the materials ... [More]
Our aluminum screw post extensions can be used to extend the length of any of our aluminum screw posts. These extensions will extend the existing binding length by 1/2". You can use the screws that came with the posts that you are extending. We carry the 3/ 8" screws if you should happen to ... [More]
Thses 3/8" clear large-head plastic screw posts are clear resin versions of our black and white large-head plastic screw posts. The large head are ideal for for flexible or lighter materials, or for uses where you want the look of a larger head.
The post length is 3/8" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. Clear plastic screw posts ... [More]
1/4" Aluminum Screw Post Extensions are anodized in a Antique Brass color to make your project a little old fashioned. They are used for extending the length of our aluminum screw posts. The post length is 1/4". Post length is the length that the extension will add to the screw post it is assembled with. The diameter of the post is 3/16" with a thread size of #8-32. This will work with any post as long as the diameter and thread size match. They come in packs of 20. If ... [More]
Flat cap screws are quick-assembly binding shafts which push together to close. Like our ultra-short clear screw posts, they can be pushed together with your fingers.
Flat cap screws should be considered semi-permanent fasteners. The screws have circular rings, not threads. Since the screw will protrude through the button head, these are best used where the back side of the item being bound is not visible.
1-1/4" Loose leaf rings are hinged on one end and have a easy locking system on the opposite end. They are a perfect way to put together swatches for paint samples, abc books for school age children, and swatch books for carpet samples. The diameter of these steel nickel plated rings are 0.130".* Inside diameter is measured from the hinge. They come in quantities of 100 and any order over 2500 should call for a price break. We stock these in our Michigan and California branch ... [More]
These 3/8 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more. The posts can be used with our ... [More]
Our aluminum screw post extensions can be used to extend the length of any of our aluminum screw posts. These extensions will extend the existing binding length by 1/4".
If you are adding these extensions to 3/8" or longer screw posts, you will also need our ... [More]
3/8" Antique Brass aluminum screw posts are a quick and easy way to bind any project. The post is 3/8" in length and has a 3/16" diameter. The post and the screw heads both have a 7/16" diameter and are 1/16" thick with a thread size of #8/32. They are wonderful for projects like scrapbooking, book binding, menus, swatches, scripts and so much more. The 3/8" antique brass post comes with a 3/8" screw. You should drill or punch a standard 1/4" hole in ... [More]
The FP60 LS high capacity tabletop paper drill drills up to 2-1/2" of paper at one time. This LS Model offers quick switching of standard hole patterns with use of a preset bar. Uses the industry standard 2 1/2" Type A Drill Bits.
Smoother drill process
Advanced instant on switch activates drill when handle is pulled
1/8 inch large-head push-lock screws are available in black and white. They are ideal for rapid assembly of swatch books, brochures, or nearly any material that needs to be bound together. No need to screw the posts together, just press them together with your fingers.
Our 3/16" clear plastic screw posts are clear resin posts having a head at one end and a hole at the other. A matching screw snaps into the hole on the post, allowing for rapid assembly.
The post length is 3/16" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. Clear plastic screw posts will fit nicely in an industry standard ... [More]
3/8" Perma Lock screws are an unslotted, drive-in type permanent locking screw. For use in all of our aluminum screw posts and standard steel screw posts sizes 3/8" and up. Perma Lock screws are made of steel and have a diagonal cross thread that, once tapped into a standard screw post, create a permanent lock. Perma Lock screws can also be referred to as Rapid Tap Screws because they tap in for quick assembly of your screw post bound ... [More]
These posts are manufactured the same as our Aluminum screw posts, then a hard anodize coating is added to produce a black color. These posts are ideal for uses where an enhanced appearance is desirable, yet the strength of aluminum posts is required.
The post length is 1" and the diameter is 3/16". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. ... [More]
3/8" Aluminum screw posts have many uses. Originally used for binding documents, they are also commonly used for connecting leather parts in cases, straps, holsters, tack, and more. Our 3/8 inch aluminum screw posts will securely fasten 3 or 4 thicknesses of 8-10 ounce leather. For maximum strength, the post should be long enough to go all the way through all of the pieces when they are assembled.
Aluminum screw posts have a multitude of other uses as well. They can be used ... [More]
7/8" aluminum screw post in Gold are a great way to spruce up your projects. They are perfect for scrapbooking, book binding, swatches, menus, and so much more.
The post length is 7/8" and the diameter is 3/16". The post length is the maximum binding thickness (inside length.)
We recommend that you measure your document to obtain the best fit. We also recommend that you punch or drill a 1/4" hole in your documents to accept these posts.
7/8" Aluminum screw posts are very versatile fasteners. You can use them for binding all types of documents or samples. They can even be used to secure the handles on custom made knives. Our customers continue to find clever new uses for these handy little binding posts.
Our 7/8" screw posts can be used to assemble just about any material that you can drill or punch a 1/4" diameter hole through. Just push the post through the hole, thread the screw into the post and ... [More]
Round Head Heavy Duty Steel screw posts are zinc coated steel posts having a large head at one end and a threaded hole at the other. A large-headed screw threads into the threaded hole on the post, allowing the assembly to be opened and closed. These posts are much stronger than our aluminum or plastic posts. They are recommended for binding exceptionally large or heavy materials.
Screw lock rings are also referred to as King Size Rings and are available in sizes up to 10". They are typically used to bind carpet swatches, rug swatches, material swatches, floor covering swatches, and other sample swatches. They can be used to fasten point of purchase displays and many other items that need to be able to rotate around a ring for displaying items. Like loose leaf rings they offer a 360-degree turn. They are conveniently shaped in a "D" formation to hold ... [More]
This is a very heavy duty single hole punch. It is perfect for punching holes in scrapbooks, swatches, or anywhere else that you will be using a screw post or loose leaf ring. It punches 1/4" diameter holes, the recommended size for our screw posts and snap rings. The adjustable depth guide makes repeat punching easy.
These posts are manufactured the same as our Aluminum screw posts, then a hard anodize coating is added to produce a gold color. These posts are ideal for uses where an enhanced appearance is desirable, yet the strength of aluminum posts is required. ... [More]
These 1-1/2 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more.The posts can be used with our ... [More]
The posts are open on the bottom and threaded all the way through, as in the picture to the
