These 1/2" loop head screws work the same as our standard push-lock screw posts, with the addition of an open loop on the screw head. The open loop allows for the attachment of beaded chain, wire, cord, monofilament line, plastic ties, metal hooks, etc. This allows the screw post to be used as a hanging point.
Sold in packages of 100.
Specifications:
The head diameter is 17/32”, the same as our large head screw posts.
Flat cap screws are quick-assembly binding shafts which push together to close. Like our ultra-short clear screw posts, they can be pushed together with your fingers.
Flat cap screws should be considered semi-permanent fasteners. The screws have circular rings, not threads. Since the screw will protrude through the button head, these are best used where the back side of the item being bound is not visible.
The 6" wall mount literature holder is a lightweight, clear PVC literature box designed to accommodate print pieces up to 6” wide. The box measures 6-1/8” wide x 5” high x 1-3/8” deep and mounts to displays and printed pieces with permanent foam tape.
3/4" Black screw post extensions are great for adding a little more room to a scrapbook or photo album. This extension is 3/16" in diameter and has a #8/32 thread. They screw into the bottom of a screw post that must have a thread size of #8/32. Your hole must be drilled or punched for 1/4" standard size to allow the post to fit into your project properly. These extensions are anodized with a black coating to give them a great shine. For orders over 25 packs or 2500 pieces ... [More]
3 1/2" Black aluminum screw posts are anodized with a black durable coating. This coating keeps them strong like the aluminum screw post yet adds a little flair to any project. Black screw posts are great for binding books, scrapbooks, menus, swatches and many more. The post length is 3 1/2" and has a 3/16" diameter. The post is measured as just the posts excluding the heads. You will only get 3 1/2" out of this post. These posts come with a 3/8" screw that has a ... [More]
Plastic screw posts are molded Delrin and Polyethelene posts having a large head at one end and a hole at the other. A large-headed screw snaps into the hole on the post, allowing for rapid assembly. Plastic screw posts may be easily unscrewed to remove or add pages.
The post length is 3/16" and the diameter is 0.24". The post length is the maximum binding thickness (inside length). We ... [More]
1-1/2" Aluminum Screw posts are anodized with a Antique Brass coating that will make any project look nice. The post length is 1-1/2" with a diameter of 3/16". The thread size of the screw and post is #8/32. You will need to have a 1/4" hole punched or drilled into the project to make the post fit properly. These Antique Brass screw posts work great for scrap booking, book binding, swatches and so many more projects. For orders over 30 packs give us a call for a price ... [More]
We now have this wonderful variety pack of loose leaf rings. For those of you who want to try different size swatches, scrapbooks, and carpet samples but dont want 100 each this is perfect for you. This variety pack includes:
Thses 3/8" clear large-head plastic screw posts are clear resin versions of our black and white large-head plastic screw posts. The large head are ideal for for flexible or lighter materials, or for uses where you want the look of a larger head.
The post length is 3/8" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. Clear plastic screw posts ... [More]
These 1/4 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more. ... [More]
These 2 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more. The posts can be used with our ... [More]
These 1/2 inch bright brass binding posts and screws are the same shape and size as our aluminum screw posts, but they are made from solid brass. In addition to the appearance of solid brass, these are stronger than the equivalent aluminum posts. Posts and screws are passivated and waxed to help prevent tarnishing.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, ... [More]
Steel extensions for Round Head Heavy Duty Steel Screw Posts are zinc coated steel posts having a screw thread at one end and a threaded hole at the other. They thread into our Round Head Heavy Duty Steel Screw Posts to extend the length of the post. Multiple extensions may be used.
These will Not work with a Wilson Jones Binder
Specifications:
The extension length is 1/2". This is the binding length that will be added to the ... [More]
Plastic screw posts are molded Delrin and Polyethelene posts having a large head at one end and a hole at the other. A large-headed screw snaps into the hole on the post, allowing for rapid assembly. Plastic screw posts may be easily unscrewed to remove or add pages.
The post length is 1" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend ... [More]
Screw lock rings, or Large Swatch rings are available in sizes 3" through 10". Screw lock rings, sometimes called King Size Rings are typically used to bind carpet or rug samples, upholstery sample materials, floor covering samples, and a myriad of other types of swatches or sample offerings. Screw locking rings are commonly used to create point of purchase displays and lots of other display items that require the function of being able to rotate around a ring in their ... [More]
These posts are manufactured the same as our Aluminum screw posts, then a hard anodize coating is added to produce a black color. These posts are ideal for uses where an enhanced appearance is desirable, yet the strength of aluminum posts is required. The posts are open on the bottom and threaded all the way through, as in the picture to the ... [More]
These 1" loop head screws work the same as our standard push-lock screw posts, with the addition of an open loop on the screw head. The open loop allows for the attachment of beaded chain, wire, cord, monofilament line, plastic ties, metal hooks, etc. This allows the screw post to be used as a hanging point.
Sold in packages of 100.
Specifications:
The head diameter is 17/32”, the same as our large head screw posts.
These 5/8 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more. The posts can be used with our ... [More]
1/2" Aluminum Screw Posts are Anodized with a hard coating making them an Antique Brass color. The post length is 1/2" and the diameter is 3/16". This is no including the head of the post or the screw. Post and screw heads are 7/16" diameter and 1/16" thick. The screw thread is #8-32. These posts come with a 3/8" long screw. We recommend that you measure your document to obtain the best fit. These posts are the industry standard size. They are compatible with ... [More]
These 1-3/4 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more. The posts can be used with our ... [More]
These 1 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more. The posts can be used with our ... [More]
Our 1/8" clear plastic screw posts are clear resin posts having a head at one end and a hole at the other. A matching screw snaps into the hole on the post, allowing for rapid assembly.
The post length is 1/8" and the diameter is 0.24". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. Clear plastic screw posts will fit nicely in an industry standard 1/4" or ... [More]
These posts are manufactured the same as our Aluminum screw posts, then a hard anodize coating is added to produce a black color. These posts are ideal for uses where an enhanced appearance is desirable, yet the strength of aluminum posts is required.
The post length is 1/2" and the diameter is 3/16". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. If necessary, ... [More]
These posts are manufactured the same as our Aluminum screw posts, then a hard anodize coating is added to produce a gold color. These posts are ideal for uses where an enhanced appearance is desirable, yet the strength of aluminum posts is required.
The post length is 3/4" and the diameter is 3/16". The post length is the maximum binding thickness (inside length.) We recommend that you measure your document to obtain the best fit. ... [More]
These 1-1/4 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more. The posts can be used with our ... [More]
These 1/4 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more. ... [More]
These 2 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the appearance or extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more. The posts can be used with our ... [More]
3/8" large-head push-lock screws are available in black and white. They are ideal for rapid assembly of swatch books, brochures, or nearly any material that needs to be bound together. No need to screw the posts together, just press them together with your fingers.
3/4" aluminum screw posts are anodized with an Antique Brass finish. This product is as strong and durable as a regular aluminum screw post but has a great antique look. This screw post is ideal for scrapbooking, book binding, menus, swatches and many more projects. The post length is 3/4" and has a 3/16" diameter. It comes with a 3/8" screw and has a thread size of #8/32. To make these posts fit properly you should drill or punch a standard 1/4" hole into your ... [More]
1/4" Aluminum Screw posts are anodized with a hard coating to produce a antique brass color. If you are looking for a way to spruce up your photo album, scrapbook, swatch, or even a menu these are a great item. The 1/4" Antique Brass post is 1/4" in length and has a 3/16" diameter. Post and screw heads are 7/16" diameter and 1/16" thick. The screw thread is #8-32. We suggest that you drill or punch for a standard 1/4" hole to allow room for the post to ... [More]
The posts are open on the bottom and threaded all the way through, as in the picture to the
